Features

• AEC-Q200 Compliant
• Low temperature coefficient and tolerances
• Excellent stability
• Heat dissipation is much better than chip resistor
• Stronger mechanical structure to endure vibration and thermal shock
• Superior power handling
• Anti-sulfuration test qualified
• Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency

Application

• Automotive

Single Surge Performance

Vehicle Grade Stabilized Film Power MELF Resistor-SFP(V) series, is showing the surge performance from 10uS to 1S.

Surge Power Derating Curve

• SINGLE SURGE PERFORMANCE graph is good for NON REPETITIVE applications operating in an ambient temperature of 70°C or less.
For temperatures above 70°C, the graph power must be derated further linearly down to zero at 150 °C.
• To determine applicable surge power in continuous-surge applications:
1. Identify allowable duration and peak power Psurge of single surge.
2. Determine ratio of surge duration/surge OFF time in application.
3. Calculate Papplicable backwardly according to Y-axis of SURGE POWER DERATING CURVE.

Suggested Pad Layout

Suggested pad layout for Vehicle Grade Stabilized Film Power MELF Resistor - SFP(V) series

Related Products

Vehicle Grade Metal Film MELF Resistor-MM102

Metal Film MELF Resistor-MM102 is in a cylindrical shape and features Metal Electrode Leadless Faces, with a power rating of 0.2W and a resistance range from 0.22 ohm to 2.2M ohm. The dimension is the same as flat chip resistors (0805), providing superior reliability and stability, along with better heat dissipation than chip resistors, and a stronger mechanical structure to endure vibration and thermal shock. It is AEC-Q200 certified.

Vehicle Grade Metal Film MELF Resistor-MM(V)

Vehicle Grade Metal Film MELF Resistor-MM(V) series is in a cylindrical shape with Metal Electrode Leadless Faces, featuring a power rating from 0.25W to 0.5W and a resistance range from 0.47 ohm to 10M ohm. It is better in heat dissipation than a chip resistor and has a stronger mechanical structure to endure vibration and thermal shock. Due to its superior reliability and stability for vehicle design, it is AEC-Q200 certified.

Vehicle Grade Metal Film MELF Precision Resistor-MMP(V)

Vehicle grade Metal Film MELF Precision Resistor is the best choice for automotive applications, where reliability and stability are of major concern. It features a power rating from 0.25W to 0.5W, a resistance value range from 10 ohm to 1M ohm with tight tolerance down to 0.1%, and a maximum operating temperature between -55℃ and +155℃. It has a stronger mechanical structure to endure vibration and thermal shock. AEC-Q200 certified.

Vehicle Grade Surge Resistant MELF Resistor-SRM

Vehicle Grade Surge Resistant MELF Resistor features a power rating from 0.25W to 3W, with resistance range from 0.1Ω to 2.2MΩ. It has the advantage of tight tolerance compared to other branded wire wound resistors, with ±1%~±5% tolerance. It can withstand maximum permissible surge voltage up to 10KV, and is equipped with higher levels of performance regarding inrush current or surge damage from the environment. It is AEC-Q200 certified and Anti-Sulfur. The resistor has an enabled SMD structure, and the sizes are the same as flat chip resistors. It has been tested and certified according to DIN EN IEC 62368-1 (VDE 0868-1):2021-05 Anhang/Annex G.10; EN IEC 62368-1:2020+A11:2020 Anhang/Annex G.10 (except SRM204 type).

Download

Vehicle Grade Stabilized Film Power MELF Resistor

AEC-Q200 certificated. The specification is disigned by tight tolerance and excellent stability after long term usage.

Download