Pulse Load High Voltage MELF Resistor (0.4W 620Kohm 5% 100PPM)
PVM204J620KTKSTR3K0
SMD resistor, Surge resistor
Products meet standard of IEC 60115-1 4.27 by low resistance drift after repeatitive pulses (1.2/50 uS) at 10x rated voltage. Pulse Load High Voltage MELF Resister 0.4W 620K ohm 5% is a kind of enhanced metal film resistor, maximum working voltage is 2 times more than other normal resistor, excellent anti-surge capability with wide range resistance value.
| Size | Power Rating | Tolerance(%) | TCR(PPM) | Resistance(Ω) | Package |
|---|---|---|---|---|---|
| 0204 | 0.4W | 5% | ±100 | 620K | 3K/Tape Reel |
Features
- SMD enabled structure
- Anti-surge feature available
- Pure tin-plated termination for excellent solderabillity Proprietary thin film handles much higher working voltage than general purpose resistors
- Heat dissipation is much better than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
- Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency
Application
- Power Supply
- Measurement/Testing Equipment
- Telecommunication
- Medical Equipment
Single Surge Performance
Pulse-Load-High-Voltage-MELF-Resister-PVM series, is showing the surge performance of 5 pulses at 12 sec. interval for 5% permanent change.
Suggested Pad Layout
Suggested pad layout for Pulse Load High Voltage MELF Resister, PVM series
- Related Products
-
High Voltage MELF Resistor-HVM
The High Voltage MELF Resistor(HVM series) features an SMD-enabled structure and high power in small packages, with a power rating ranging from 0.16W to 3W and a resistance range from 100K ohm to 68M ohm. It is capable of handling much higher working voltage than general-purpose resistors and is better at heat dissipation than chip resistors. Additionally, it boasts a stronger mechanical structure to withstand vibration and thermal shock.
Surge Resistant MELF Resistor-SRM
The Surge Resistant MELF Resistor features a power rating from 0.25W to 3W, with a resistance range from 0.1Ω to 2.2MΩ. It has the advantages of tight tolerance compared to other branded wire wound resistors, with ±1%~±5% tolerances, and maximum permissible surge voltage up to 10KV. It is equipped with higher levels of performance regarding inrush current or surge damage from the environment. It is AEC-Q200 certified and anti-sulfur. It has an SMD structure and the sizes are the same as flat chip resistors. It has been tested and certified according to DIN EN IEC 62368-1 (VDE 0868-1):2021-05 Anhang/Annex G.10; EN IEC 62368-1:2020+A11:2020 Anhang/Annex G.10 (except SRM204 type) with VDE license number 40043961 and VDE license number 40054118.
Metal Film MELF Precision Resistor-MMP
The Metal Film MELF Precision Resistor(MMP) features a power rating from 0.16W to 1W, a resistance range from 10 ohm to 1M ohm, and with tight tolerance down to ±0.1%, making it the perfect choice for modern professional electronics where reliability and stability are major concerns. Its SMD enabled structure with MELF style is better in heat dissipation than chip resistor, and it has a stronger mechanical structure to endure vibration and thermal shock. The Metal Film MELF Precision Resistor is the most precision resistor in Firstohm's product catalog.
Metal Film MELF Resistor(Pulse withstanding)-MM(P)
The Metal Film MELF Resistor MM(P) is designed with high pulse withstanding and excellent stability. The power rating of MM(P) ranges from 0.16W to 0.5W, and resistances range from 0.1 ohm to 330K ohm with standard tolerances of ±1%, ±2%, and ±5%. This resistor is excellent at heat dissipation and has a stronger mechanical structure to endure vibration and thermal shock. Contact Firstohm or check out our products for specific information.
- Download
Pulse Load High Voltage MELF Resister
A enhanced metal film resistor with MELF package, support wide range resistance and higher working voltage.
Download
