Features

• AEC-Q200 Compliant
• Excellent solderability termination
• Anti-sulfuration test qualified
• Heat dissipation is much better than chip resistor
• Stronger mechanical structure to endure vibration and thermal shock
• Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency

Application

• Battery Management System (BMS)
• IGBT Driver
• Motor Controller
• LED Lighting

Single Surge Performance

Metal Film MELF Resistor,Vehicle Grade-MM(V) series, is showing the surge performance from 10uS to 1S.

Surge Power Derating Curve

• Above graph is accurate for NON REPETITIVE applications operating in an ambient temperature of 70°C or less. For temperatures above
70°C, the graph power must be derated further linearly down to zero at 155°C. • For applicable surge power in continuous-surge applications please see SURGE POWER DERATING CURVE above.

Suggested Pad Layout

Suggested pad layout for Metal Film MELF Resistor, Vehicle Grade, MM(V) series

Related Products

Vehicle Grade Stabilized Film Power MELF Resistor-SFP(V)

Vehicle Grade Stabilized Film Power MELF Resistor-SFP(V) series, features a power rating from 0.4W to 3W, with a resistance range from 0.22 ohm to 1M ohm. It is Anti-Sulfur and AEC-Q200 certified. The maximum working voltage depends on the power rating of the resistor, ranging from 200V to 400V. The Maximum overload voltage is twice the maximum working voltage, ranging from 400V to 800V. It is suitable for IGBT gate driver resistors, capacitor charge/discharge resistors, battery management systems, etc. The Enabled SMD structure and the sizes are the same as flat chip resistors, providing alternatives for each other.

Vehicle Grade Metal Film MELF Resistor-MM102

Metal Film MELF Resistor-MM102 is in a cylindrical shape and features Metal Electrode Leadless Faces, with a power rating of 0.2W and a resistance range from 0.22 ohm to 2.2M ohm. The dimension is the same as flat chip resistors (0805), providing superior reliability and stability, along with better heat dissipation than chip resistors, and a stronger mechanical structure to endure vibration and thermal shock. It is AEC-Q200 certified.

Vehicle Grade Metal Film MELF Precision Resistor-MMP(V)

Vehicle grade Metal Film MELF Precision Resistor is the best choice for automotive applications, where reliability and stability are of major concern. It features a power rating from 0.25W to 0.5W, a resistance value range from 10 ohm to 1M ohm with tight tolerance down to 0.1%, and a maximum operating temperature between -55℃ and +155℃. It has a stronger mechanical structure to endure vibration and thermal shock. AEC-Q200 certified.

Vehicle Grade Surge Resistant MELF Resistor-SRM

Vehicle Grade Surge Resistant MELF Resistor features a power rating from 0.25W to 3W, with resistance range from 0.1Ω to 2.2MΩ. It has the advantage of tight tolerance compared to other branded wire wound resistors, with ±1%~±5% tolerance. It can withstand maximum permissible surge voltage up to 10KV, and is equipped with higher levels of performance regarding inrush current or surge damage from the environment. It is AEC-Q200 certified and Anti-Sulfur. The resistor has an enabled SMD structure, and the sizes are the same as flat chip resistors. It has been tested and certified according to DIN EN IEC 62368-1 (VDE 0868-1):2021-05 Anhang/Annex G.10; EN IEC 62368-1:2020+A11:2020 Anhang/Annex G.10 (except SRM204 type).

Download

Metal Film MELF Resistor, Vehicle Grade

AEC-Q200 compliance, superior reliability and stability, excellent in heat dissipation than chip resistor and stronger mechanical structure to endure vibration...

Download