High Voltage MELF Resistor (0.16W 680Kohm 1%)
HVM16F680KTKZTR3K0
High Voltage Resistor, SMD Resistor
The High Voltage MELF Resistor rated at 0.16W 680Kohm 1%, is an SMD resistor made using thin-film technology. It is specially designed to work in high voltage circuits by voltage dividing, with a maximum working voltage far surpassing that of general-purpose resistors.
| Size | Power Rating | Tolerance(%) | TCR(PPM) | Resistance(Ω) | Package |
|---|---|---|---|---|---|
| 0204 | 0.16W | 1% | -- | 680K | 3K/Tape Reel |
Features
- SMD enabled structure
- VDE0860 Compliance
- Handles much higher working voltage than general purpose resistors
- Heat dissipation is much better than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
- Pure tin-plated termination for excellent solderability
- Anti-surge features available
- Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency
Application
- Power Supply
- Automotive
- Testing & Measurement Equipment
Suggested Pad Layout
Suggested pad layout for High Voltage MELF Resistor, HVM series
- Related Products
-
Pulse Load High Voltage MELF Resister-PVM
The Pulse Load High Voltage MELF Resistor(PVM) features a power rating from 0.4W to 1W, with a resistance range from 300K ohm to 39M ohm, and tolerances of ±1%, ±2%, and ±5%. It has an SMD-enabled structure due to MELF packing 0204/0207. Its proprietary thin-film can handle much higher working voltage than general-purpose resistors, since it possesses an anti-surge feature coated on a cylindrical ceramic rod and is packed as a MELF resistor. The Pulse Load High Voltage MELF Resistor provides better thermal dissipation than chip resistors.
Surge Resistant MELF Resistor-SRM
The Surge Resistant MELF Resistor features a power rating from 0.25W to 3W, with a resistance range from 0.1Ω to 2.2MΩ. It has the advantages of tight tolerance compared to other branded wire wound resistors, with ±1%~±5% tolerances, and maximum permissible surge voltage up to 10KV. It is equipped with higher levels of performance regarding inrush current or surge damage from the environment. It is AEC-Q200 certified and anti-sulfur. It has an SMD structure and the sizes are the same as flat chip resistors. It has been tested and certified according to DIN EN IEC 62368-1 (VDE 0868-1):2021-05 Anhang/Annex G.10; EN IEC 62368-1:2020+A11:2020 Anhang/Annex G.10 (except SRM204 type) with VDE license number 40043961 and VDE license number 40054118.
Medium Voltage Resistor-MVR
The Medium Voltage Resistor(MVR series) adopts a THT style and features a power rating ranging from 0.25W to 2W. It has a resistance range from 47 ohm to 100M ohm, with resistance tolerance ranging from ±0.1% to ±5%. Additionally, the maximum working voltage ranges from 400V(RMS) to 5KV(RMS). This series serves as a low-cost alternative to metal glazed resistors, and is especially suitable for SMPS & lighting devices.
High Voltage Fixed Resistor-HVR
The High Voltage Resistor(HVR series) is equipped with a special conductive film that withstands high voltage. It features a power rating ranging from 0.25W to 3W and a resistance range from 100K ohm to 68M ohm, with a maximum working voltage far exceeding that of general-purpose resistors. This makes it suitable for applications such as power supply and high voltage detection. It has been approved to meet the safety requirements of VDE0860, IEC 60065 clause 14.2a, and UL 1676 in Y2004.
- Download
High Voltage MELF Resistor
SMD enabled structure and high power in small package, special design to achieve high working voltage.
Download
