Carbon Film MELF Resistor ( 0.25W 100Kohm 5%)
CM204J100KRTKZTR3K0
Carbon Film Resistor, SMD Resistor
Carbon Film MELF Resistor(CM) 0.25W 100Kohm 5%, SMD enabled structure with cylindrical design and excellent solderability termination, the heat dissipation is much better than chip resistor and stronger mechanical structure to endure vibration and thermal shock, and lower current noise than thick film flat chip resistors.
| Size | Power Rating | Tolerance(%) | TCR(PPM) | Resistance(Ω) | Package |
|---|---|---|---|---|---|
| 0204 | 0.25W | 5% | -- | 100K | 3K/Tape Reel |
Features
- SMD enabled structure
- Excellent solderability termination
- Heat dissipation is much better than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
- Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency
Application
- Telecommunication
- Audio Product
- Consumer Product
Suggested Pad Layout
Suggested pad layout for Carbon Film MELF Resistor, CM series
- Related Products
-
Wire Wound Resistors-WA
Wire Wound Resistor(WA series)features a power rating from 0.5W to 8W and a resistance range from 100m ohm to 3.3K ohm. It can withstand large loads at high ambient temperatures with long-term stability. The resistor has a flameproof multi-layer coating equivalent to UL 94 V-0 and has undergone an overload test per UL 1412. The color code follows MIL & EIA standards. Additionally, it is equipped with special tin-plated electrolytic copper lead wires.
Metal Oxide Film Fixed Resistor-MO
Metal Oxide Film Fixed Resistor (MO) features a power rating from 0.5W to 7W and a resistance range from 0.1 ohm to 220K ohm. The standard tolerance is set at ±5% only, with a TCR of ±300PPM/℃. When compared with a metal film resistor, MO can support higher power requirements and withstand large pulse loads in high ambient temperatures while maintaining long-term stability. It is flameproof with multi-layer coating equivalent to UL 94 V-0 and is solvent resistant.
Stabilized Film Power MELF Resistor-SFP
The Stabilized Film Power MELF Resistor (SFP series) is optimized for heat dissipation, featuring a low temperature coefficient and tolerances, and supports a power rating from 0.4W to 3W, with a resistance range from 0.5 ohm to 10M ohm. The resistance is most stabilized after long-term operation due to its superior metal film coating on the cylindrical ceramic rod. Its SMD-enabled structure with MELF style provides better heat dissipation than a chip resistor, along with a stronger mechanical structure to withstand vibration and thermal shock. The Firstohm SFP series serves as the best alternative to MMA0204/MMB0207.
- Download
Carbon Film MELF Resistor
SMD enabled structure & lower current noise than thick film flat chip resistors.
Download
