膜型瓷精晶圓電阻 1W 10Kohm 5%
C3M100J10K0TKZTB500
陶瓷合成電阻器
膜型瓷精晶圓電阻C3M100 1W 10Kohm 5％，抗脈衝特性極佳，適合替代陶瓷合成電阻器，廣泛使用在不同應用上。第一電阻利用多年來累積的電阻製作技術及經驗，可提升傳統瓷精電阻器的生產良率並同時降低生產成本。
| 尺寸 | 額定功率 | 精度(%) | 溫度係數(PPM) | 阻值(Ω) | 包裝方式 |
|---|---|---|---|---|---|
| -- | 1W | 5% | -3000 | 10K | 500/Bulk |
產品特性
- SMD enabled structure
- Heat dissipation is much better than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
- Suitable replacement for ceramic composition resistors, which are requirement in most applications.
- Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency
產品應用
- 工業電源產品
- 醫療產品
- 通訊設備
單次浪湧性能
Composite Film-Type Ceramic Composition Resistor-C3100,is showing the surge performance from 10uS to 1S.
浪湧功率降額曲線
• SINGLE SURGE PERFORMANCE graph is good for NON REPETITIVE applications operating in an ambient temperature of 70°C or less.
For temperatures above 70°C, the graph power must be derated further linearly down to zero at 150 °C. • To determine applicable surge power in continuous-surge applications: 1. Identify allowable duration and peak power Psurge of single surge; 2. Determine ratio of surge duration/surge OFF time in application; 3. Calculate Papplicable backwardly according to Y-axis of SURGE POWER DERATING CURVE.
建議焊盤尺寸
Suggested pad layout for Composite Film-Type Ceramic Composition MELF Resistor, C3M100
- 檔案下載
