汽车级抗突波绕线晶圆电阻1W 2.2ohm 5%
SWM100J2R20TKZTR2K5
汽车级抗突波绕线晶圆电阻
汽車級抗突波繞線晶圓電阻 1W 2.2ohm 5%是通過將Nichrome合金線纏繞在優質陶瓷棒上製成的,它可以在高溫下長期穩定運行。汽車級抗突波繞線合金線電阻用於需要抗浪湧和高功率消耗的電路中。符合AEC-Q200規範,抗硫化,多國專利正在審批中。
| 尺寸 | 额定功率 | 精度(%) | 温度系数(PPM) | 阻值(Ω) | 包装方式 |
|---|---|---|---|---|---|
| 0309 | 1W | 5% | -- | 2.2 | 2.5K/Tape Reel |
产品特性
- AEC-Q200 Compliant
- SMD enabled structure
- Heat dissipation is much better than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
- Flameproof multi-layer coating equivalent to UL 94 V-0
- Flameproof feature equivalent to overload test UL 1412
- Enhanced weld spot is reliable against surge
- Products meet RoHS requirements and do not contain substances of very high concern identified by European Chemicals Agency
- SWM series is applied in high surge applications such as high rush current protection for power capacitor, motor start-up protection, car & motorcycle engine ignition, etc. to absorb harmful surge energy, so to prevent hazard of circuit damage caused by surge energy
产品应用
- 电动车/ 汽车
- 马达启动保护
- 电容充电(放电)电阻
- ISO7637-2电池卸附载测试
- ISO16750-2电池卸附载测试
单次浪涌性能
Anti-Surge Wirewound MELF Resistor - SWM series,is showing the surge performance from 10uS to 1S.
- 相关产品
-
汽车级抗突波膜层晶圆电阻- SRM
汽车级抗突波膜层晶圆电阻的额定功率为0.25W至3W,电阻范围为0.1Ω至2.2MΩ,优点在与其他品牌绕线电阻器相比,抗突波膜层晶圆电阻有紧密的公差,误差范围在±1%〜±5%,允许最大浪涌电压高达10KV,在浪涌电流或环境浪涌损坏方面具有更高的性能。符合AEC-Q200认证,抗硫化,适合表面黏着技术的外形结构,且尺寸与扁平芯片电阻相同,通过VDE安规测试规范与认证DIN EN IEC 62368-1 (VDE 0868-1):2021-05 Anhang/Annex G.10; EN IEC 62368-1:2020+A11:2020 Anhang/Annex G.10(SRM204型除外)
- 档案下载
-
